Monday, September 22, 2008

Cactus Model Y

This is the model with 71% of the model cut out. For some reason the Mass properties only displays 0.00 for the volume of the model. Though before adding on the exploded parts on it, the volume was 23547.65 whioch is more than 71% of the original model. I am not too sure how much extra i have added on as it is not showing. This number can be obtained by yourself after you open my file and delete from Plane 16 onwards.


This is a zoom video of the Y cactus model

These are links to the model
CactusY.SLDPRT

http://www.sendspace.com/file/6dterx


These are links to the video
http://files.filefront.com/cactusyavi/;11861835;/fileinfo.html
http://www.sendspace.com/file/fbn56m


The outcome of this model to reinforce my previously stated before forms of explosions. This being the sense of being hidden in which can be seen by how inside parts of the model are still intact. This can concur that area may have been sealed off tightly, but because of the large force from the explosion large chunks of the model have been ripped apart from it. This can be seen by how parts of the model have flown off the building. Though there is something extra that i would like to make sure is that the force of the explosion should have forced the building of the ground and thus there are even pieces falling from the bottom of the building. Therefore this is a a model of what would have happen a few seconds after the explosion occurred and how pieces are still flying off the building. There is also reference to the small, medium and large explosion. This can be seen by how different parts of the original model are intact and how the cutouts of the envelope contain small and large amounts of cutouts. I also purposely made this the zoom model as to mirror the barrels exploding from my first experiment. This is because it is like looking at the barrels in the scope of the crossbow and then zooming back out to see the explosion occur.

Cactus Model X

This is the model with 46% of the model cut out.


This is a rotation video of the model


These are links to the model
CactusX2.SLDPRT

http://www.sendspace.com/file/fit0co


These are links to the video
http://files.filefront.com/cactusmov/;11859094;/fileinfo.html

http://www.sendspace.com/file/u7g0bc





The outcome of this model is shown in how there is still a part attached in the bottom of model. This can be seen as a hiding spot in the whole building where someone could have been when the explosion occurred. This relates back to how you can be hidden in an explosion and have no idea what has happened. Though as seen in the model it doesn't just seem as though one explosion occurred. Multiple explosion occurs and thus this relates back to my other theory of how explosions occur linearly with both horizontal and vertical. There is also a sense of small, medium and large explosions occurring. The wider side faces have the big circular cut out, where as the thinner sides have medium cuts and the top of the model has four small explosions occurring.

Cactus Model

This is the original Cactus model.


The is a pan video of the cactus model.

These are links to actual model
Cactus.SLDPRT

http://www.sendspace.com/file/88mge6


These are links to the video
http://files.filefront.com/cactusmov/;11859094;/fileinfo.html

http://www.sendspace.com/file/53mcwu




The outcome of this model is mainly done through using extrude cuts of rectangles. Through this model i further develop the idea of explosion from my first experiment.